You are here: Home Products SMAT - SMAT16B

SMAT - SMAT16B Pump Series

  • Print

FOR THE USA MARKET ONLY

SMAT

SMAT

SMAT and SMAT16B series are constituted by standard 3 screws SMT and SMT16B pumps with different flanges and connections (please check the drawings) that follow the US standard criteria.

Applications:

OIL & GAS

  • OIL & FUEL - Oil Lubrication Transfer services (API676)

POWER

  • Tandem solution for burner boosting systems
  • Burners injections
  • Turbine & compressors lubrication
  • Seal oil applications and services
  • Jacking oil systems,
  • Filtration, lube services
  • Oil transfer

WIND ENERGY

  • High viscosity lubrication and filtration

Gear box lube oil

  • High viscosity lube
  • Air emulsion
  • Heavy duty applications

INDUSTRIAL

  • Power hydraulics
  • Injection moulding machines
  • High and low pressure filtration systems
  • Hydro power
  • Paper industry

TECHNICAL CHARACTERISTICS

SMT

TYPES Dry  or submerged
MODELS 20 - 25 - 32 - 40 - 45 - 55 - 60 - 70 - 80 – (90 – 110 SMAT16B)
FLANGES SAE J744 (hollow shaft option not available)
CONNECTIONS SAE 3000 Inlet/Outlet ports (GR32→GR110) – BSPP or SAE O-Ring Boss J1926-1 (GR20→GR25)
DRIVE LOADING No axial or radial loads
SHAFT ROTATION Clockwise (from shaft end)  counter clockwise available,  please contact Settima
SHAFT SPEED From 500 to 3.600 rpm (depending on models, please contact Settima)
FLOWS From 8 up to 1.600 Lt/min (at 1.490 rpm)
OUTLET PRESSURE 1200 psi continuous – 1450 psi peak
INLET PRESSURE Min. -5 psi / Max. 43 psi with standard shaft seals (for higher pressure please contact Settima)
FLUIDS
Please ask Settima for configuration according the fluid used. 		Mineral oil HLP and HLVP
Ecological fluids HETG-HEPG-HEE
Synthetic  fluid or  emulsions:
  • HFA oil-water  - oil min. 5%
  • HFB water-oil emulsion ≥40%
  • HFC water/glycol – water max 35 to 55%
  • HFDR phosphate ester
  • Lubrication high viscosity oils
Special synthetic fluid:
  • MIL-H, SKYDROL, others on request
VISCOSITY From 30 SSU to 2000 SSU (for high viscosity applications and/or oil-air emulsions, water glycol please contact Settima)
SEALS NBR, Viton, FKM, EPDM, PTFE (others on request)
ACOUSTIC EMISSIONS From 55 up to 68 db(A) at 2.750 rpm per ISO 4412 standard
PUMP BODY Extruded aluminium alloy
PUMP BODY (special applications) Cast iron, carbon steel inox, hardened steel
SCREW Steel for primary screw, cast iron for secondary screws
ENVIROMENT TEMPERATURE From -4°F up to +140°F
HYDRAULIC TEMPERATURE From -4°F up to +356°F (with mechanical seals)
FILTRATION Permissible degree of fluid contamination NAS to 1638 class 8 or ISO DIS 4406 17/14. Recommended filtration β 25 ≥ 75



2011 © Settima meccanica srl - All rights reserved